• 8 mm brushed aluminium front.
• 2×150Wrms / 8Ω.
• 2 toroidal transformers of 440 VA each.
• Filtering capacitors: 12×6800 μF high quality, with low ESR specific for ATOLL.
• Specific low-consumption 5 VA power supply for the digital stages.
• 2 volume attenuators: 1 per channel to maintain the dual mono architecture.
• Soft start stage to avoid peak consumption.
• ABSOLUE CREATIONS high-end cable on the mains part.

• MOS-FET triple push-pull power stage.
• Shielded MKP Mundorf capacitors.
• Possibility to adjust and store the balance.
• Discrete component audio stages.
• MKP Technology Link Capacitors.
• High-performance heat sinks, direct thermal coupling.
• Double-sided circuit boards with nickel/gold finish.
• Polarization of output stages in class A/B.
• Thermal protection.
• Serial DAC board.
• Optional PHONO boards: P50 and P100, can be combined with the DAC board.
• ATOLL global remote control delivered as standard.

Specific copper speaker output connectors specially manufactured for ATOLL.

Internal wiring of the speaker outputs with high-end cable.

Output connectors (RCA) gold-plated.

CONNECTIVITY

Line Inputs

• 5 Audio inputs (RCA): AUX (or optional P50 / P100 phono stage), CD, TUNER, DVD, TAPE (IN + OUT).
• 1 BY-PASS input (used as a power amplifier).
• 1 XLR input.

Digital inputs

• 2 Coaxial Inputs.
• 2 Optical Inputs.

1 USB-B input

• DAC converter: AKM – AK4490 / PCM: 32 bits – 768 kHz
• Built-in converter: Asynchronous USB input, PCM & DSD decoding.
• DSD: 2,8 MHz/5,6 MHz
• 1 Bluetooth receiver (data conversion by AKM – AK4490).

 Outputs

• 1 Pair of loudspeaker outputs.
• 2 Pre-out outputs.
• 1 Headphone output Ø 6,35 mm.
• 1 Trigger output (12V).

View the standard for XLR connector wiring.

LINK CAPACITORS:

• Analogue stages: MKP Mundorf shielded capacitors.
• Digital stages: high audio quality MKP Vishay capacitors.

OUTPUT STAGES:

• Double mono stages with 2 toroidal transformers of 440 VA.
• Specific low-consumption power supply (5VA) for managing the display and logic circuits.
• Total capacitance of 12×6800 uF with high-quality ESR capacitors made to ATOLL specifications.
• Output stages with very little feedback provide a lot of dynamics and a very natural sound.
• Specific stages to avoid current peaks on ignition.
• High-end specific internal power wiring.

INPUT STAGES:

• Volume by double attenuator: 1 per channel.
• Bipolar symmetric stages with discrete components.